Cut To Length Scaffolding Roll Forming Machine For 0.5 - 3.0mm Stainless Steel

Cut to Length Roll Forming Machine for 0.5-3.0 Stainless Steel With Post Hydraulic Cutting

Characteristics of this machine

1. Auto forming and cutting at any length with a preset amount.

2. The signal feedback of the encoder shows the length of the product.

3. The control panel can calculate the total length of the finished coil.

4. Roll for alloy steel, CNC precision processing, hard chromium plating surface.

5. The cutting die is SKD11 steel, NC machining, heat treatment 55-60hrc.

The cut-to-length roll forming machine consists of a sturdy and stable frame and rollers, with a powerful cutting device and a slitting device, equipped with a PLC automatic control system and a gap adjustment device, which is convenient and efficient.

This cut-to-length roll forming machine is hydraulically driven and is used to cut or divide a metal flat plate into the required length and width.
With the leveling feeding device and encoder device, it automatically controls the length and number of pieces produced.

The thickness of the sidewall frame is 22mm, which is firm and firm. It is transported by the Japanese Yaskawa brand servo motor to ensure high precision.

Work Follow

Decoiler-Feeding Device-Leveling Device - Main Machine System - Hydraulic Post Cutting/HySlitting Device

Machine Components

1) Straightening and Cut-to-length Machine

Applicable material: Galvanized Steel(GI), Cold Roll Steel(CRC)

With Yield Strength: G235-550Mpa

Suitable Material thickness: 0.5-3.0mm

Width:1600mm

With Feeding Device

With Leveling Function

With Shearing Function

With PLC Control System

Main Machine Motor:11KW+3.7KW

Line Speed:20m/minute

The Length Of Tolerance:±1(2.5m)

With Up Five, Down Six Shafts Total eleven Shafts

Shafts manufactured from 45# steel, Quenching and tempering heat treatment, hard chrome plating.Diameter=φ105mm, precision machined

Wall Thickness: Q235 t30mm

2) Post Hydraulic Cutting Device

Post cut, stop cut, two-piece blade design, no blanking

Hydraulic motor: 5.5kw;
Cutting pressure: 0-16mpa

Tool material :Cr12MoV(= SKD11)

Heat treatment to HRC58-62 degrees

The cutting power is provided by the main engine hydraulic station

The hydraulic system adopts an oil filter to filter the oil to ensure the cleanness of circulating oil and extend the service life of the hydraulic system.

Clearance adjustment device: Adjust the blade gap for precise cutting.

scaffolding walking board roll forming machine

scaffold roll forming machine

Cut To Length Scaffolding Roll Forming Machine

Cut To Length Scaffolding Roll Forming Machine For 0.5 - 3.0mm Stainless Steel Images